2 Gal (10L) Tanks

Binks Range of High Quality Pressure Feed Tanks and Paint Supply Containers
Binks Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure.

Overview

Binks Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure.

The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure), safety pressure relief valves and Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation.

Binks Pressure Feed Containers are constructed from the highest-grade materials and fully comply with Global pressure regulations including PED, ATEX and ASME.

Binks have a pressure feed tank to fit every application.

  • Binks A.S.M.E. code tanks meet OSHA regulations when using flammable and combustible materials.
  • Constructed from Heavy Gauge steel with forged steel clamps
  • St St & Carbon Steel Plated tank range covers ALL industrial applications
  • Higher pressure rating for Heavier materials
  • Range offers complete material handling suitability for solvent and waterborne coatings
  • Inner Liners reduce cleaning time and save coating material
  • Bottom outlet conversion kits available
  • Single air regulator as standard with optional dual outlet kits

 

PT ASME Zinc Plated Lid/Shell

Ideal for solvent-based coatings when used with a disposable tank liner. Zinc plated lid and all wetted parts in lid assembly including: fluid tube, lid bushing, outlet elbow and fitting, and agitator shaft, including a Zinc plated tank shell.

PT ASME SS Lid/Zinc Shell

Ideal for waterborne coatings when used with a disposable tank liner. 300 grade stainless steel lid and all wetted parts in lid assembly including fluid tube, lid bushing, outlet elbow and fitting, agitator shaft with Zinc plated tank shell.

Galvanized PresureTanks

Galvanized steel tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. The bottom outlet is recommended for heavy, viscous materials such as emulsified asphalts, cutback asphalts, rubber compounds, etc.

Stainless Steel Pressure Tanks

Stainless Steel Pressure Tanks are suitable for virtually all fluids and solvents. They are ASME certified and permanently labeled for 110 PSIG maximum working pressure. Tanks and lids are constructed of heavy gauge 304 stainless steel and are also electro polished. All models are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts.

Overview
Binks Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure.

The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure), safety pressure relief valves and Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation.

Binks Pressure Feed Containers are constructed from the highest-grade materials and fully comply with Global pressure regulations including PED, ATEX and ASME.

Binks have a pressure feed tank to fit every application.

  • Binks A.S.M.E. code tanks meet OSHA regulations when using flammable and combustible materials.
  • Constructed from Heavy Gauge steel with forged steel clamps
  • St St & Carbon Steel Plated tank range covers ALL industrial applications
  • Higher pressure rating for Heavier materials
  • Range offers complete material handling suitability for solvent and waterborne coatings
  • Inner Liners reduce cleaning time and save coating material
  • Bottom outlet conversion kits available
  • Single air regulator as standard with optional dual outlet kits

 

PT ASME Zinc Plated Lid/Shell

Ideal for solvent-based coatings when used with a disposable tank liner. Zinc plated lid and all wetted parts in lid assembly including: fluid tube, lid bushing, outlet elbow and fitting, and agitator shaft, including a Zinc plated tank shell.

PT ASME SS Lid/Zinc Shell

Ideal for waterborne coatings when used with a disposable tank liner. 300 grade stainless steel lid and all wetted parts in lid assembly including fluid tube, lid bushing, outlet elbow and fitting, agitator shaft with Zinc plated tank shell.

Galvanized PresureTanks

Galvanized steel tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. The bottom outlet is recommended for heavy, viscous materials such as emulsified asphalts, cutback asphalts, rubber compounds, etc.

Stainless Steel Pressure Tanks

Stainless Steel Pressure Tanks are suitable for virtually all fluids and solvents. They are ASME certified and permanently labeled for 110 PSIG maximum working pressure. Tanks and lids are constructed of heavy gauge 304 stainless steel and are also electro polished. All models are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts.

If you need more information please feel free to contact us